Give Your Cyclone Chain Scrubber A Refresh
When the Park Tool Cyclone Chain Scrubber wears out, it becomes exceedingly hard to get that gunk off your chain to keep you spinning clean. The sponges erode away and the bristles bend and soften, making the scrubber far less effective. If such is the case for your Cyclone, have no fear. Park Tool's RBS-5 Replacement Brush Set replaces the original brush wheels and sponges in your CM-5 and CM-5.2 Chain Scrubber, so your machine functions properly, and those chains are squeaky clean.
- Replaces brushes and sponges for: CM-5 and CM-5.2 Chain Scrubbers
- Revitalizes your chain scrubber for longer drivetrain lifespan
B-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.
The product weight specified is an approximate weight based on the manufacturer's specifications (if available) or our measurement of one or two examples. For most products, the weight will typically vary by 5% to 10%.
I am a bit anal about keeping my chain clean. I do 3.000+ road miles a year road so the chain stays much cleaner than those of you who ride on dirt or clean your friends chains. I also ride year round and get about two season before I need to replace the brushes.
The parts are used as replacements in the Park RBS-5 chain cleaning system. After cleaning many chains, especially wider ones, the bushes sort of wear out, which leads to reduced cleaning of the chain when used. By replacing the moving parts, the tool become fully functional again. Replacing the brushes is very easy and takes less than a minute. If you have the Park RBS-5 tool, check the inner brushes on the large rotating cylinder. These are the ones that wear the fastest.
If you are detailed about keeping your chain clean or your friends like to borrow your Park chain cleaner, then you will want this replacement Brush and sponge set. Brushes wear out and this will make your chain cleaner like new again.
I was not aware that replacement parts existed for the Park Tool Cyclone Chain Cleaner until I saw it on this site. The RBS-5 Replacement Brush Set gives new life to the best chain cleaner out there making it a great value. Keeping a clean chain helps save wear and tear on the cassette so it's a double great value!! Park Tool always delivers and they sure did this time!
These make the Cyclone more durable and justify the initial outlay, but if you don't have a Cyclone Chain Scubber, they would be pretty rubbish, so I wouldn't recommend them then.
I keep my chain very clean since it improves shifting performance on my ultegra equipped bike. I had worn out the innards on my Cyclone Chain Scrubber and this replcement kit was alot cheaper than buying a new one. The replacement parts fit well and have worked well so far although one of the brushes lost a few bristles at first. Good buy.
Articles will open in new tab.