
User submitted reviews
Review by Six-O
I put this on the end of the hose of my Fanttik S200 APEX portable electric pump I bought at one of the well-known club warehouses. I was concerned about the outside dimension of the hose working with the Lezyne Clik Chuck. So I bought a spare hose on Amazon after reading a review that said it fit the Fanttik pump. I cut the end off the hose, wet it with alcohol, pushed the chuck into it, and screwed on the nut. Voila! It fit like a champ. So now I have a quality Clik chuck instead of the solid plastic Schwalbe adapter on the end of the hose. The bleed valve will allow me to easily depressurize my tubeless tires when I am ready to add sealant or just replace them. The 90-degree head makes it a bit easier to attach to the Clik valves. I highly recommend and may build another set sometime.
Review by AMarks
This converted my Gravelero pump from Schrader/Presta to Clik. I then used my Speedy Stitcher to close one end of a 6" piece of 1.5" Nylon Protective Hose Sleeve, turned it inside out, and covered the right-angle head on the pump. It stopped rattling and collecting crud. The chuck works great: I recently got a 2" finishing nail through my rear tire and after replacing the tube with a spare I inflated it with my modified pump.
Review by Anonymous
Much better fit, finish and feel than the equivalent from Schwalbe. Much easier to attach to hose

















