ENVETubeless Valve Stem - Single(Return to Product Page)

I have Campagnolo Bora Ultra carbon wheels on a couple of my bikes. On a hot day the valve of the front wheel pushed through to the inside of the wheel causing an instant flat. That valve had a conical kind of triangular shape which enabled the failure. The ENVE valves are, by comparison, have a long and rectangular base which fit the rim valley perfectly and, once installed, allowed me to pump up the tires with my old Silca pump as quickly as pumping up a tubed tire. This is especially important as on the road puncture management with tubeless tires can be especially difficult.

Can work with any brand but Enve specifies which size to use based on the rim depth of your wheel which makes choosing the right size very simple. Unfortunately, they only come in one color, black. (Otherwise, I'd give 5 stars) Overall, an excellent tubeless valve.

Excellent valve for the money. No issues

Great customer service and rapid delivery.

I had two Ritchey aluminum rims that had somewhat failed at the inside of the valve holes. Possibly due to me over-tightening them. These valves have a large rectangular base that covered the failures and with some extra Stans Rim Tape allowed me to keep using them. All valves should use this large rectangular base design versus the round valve bases. Yay!

I like the part that goes in the center channel. My previous tubeless stems have rubber cones that could rotate easily, and once that happened, it's hard to fix without taking things apart. It also comes with a nice little cap to remove the valve core.

Enve wheels are not the easiest to retape. You have to press this valve really really good. Got this on sale again. Ty BTD.

Good flow and design keeps valve from spinning, short length works nicely with clickvalve cores.