Description
The new BBT-9 Bottom Bracket Tool is designed to remove and install Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Truvativ Giga X-pipe and Campy Ultra-Torque bottom bracket cups. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 notches of the bottom bracket cups, while the other end engages the 8 internal splines of the crank arm adjustment cap (Shimano). NOTE: The older XTR M952 and Dura-Ace 7703 cartridge bottom brackets use the BBT-2 only. The Dura-Ace BB7700 bottom bracket (adjustable type) uses the BBT-7.
B-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.
The product weight specified is an approximate weight based on the manufacturer's specifications (if available) or our measurement of one or two examples. For most products, the weight will typically vary by 5% to 10%.
Reviews
Ordered by Most Relevant First
5 stars
4 stars
3 stars
2 stars
1 stars
Reviewed 5/14/2015
by Anonymous
Competitive Racer
Chicago
Value Rating
Overall Rating
As always, Park tools perform flawlessly
Works great for what it was designed to do.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 6/4/2018
by Victorbchoi
Northern Virginia
Awesome tool
This bottom bracket tool is a must have if you want to change your bottom bracket, clean hard to reach places, etc. It works great and how you'd expect it to. Grease, oil, and dirt comes right off if your bottom bracket tool (if dirt can come off of my bottom bracket tool because of a dirty bike, they it is certain that it was clean right off of yours).
Was this review useful to you?
Yes/
NoThank you for your feedback.
Helpful.
Great tool to have for DIY maintenance. I have two of the same type of bottom brackets and this one fits both.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 8/21/2020
by ManDog
Cycling Enthusiast
Portland Oregon
Value Rating
Overall Rating
Right tool for the job
Fit my FSB BB replacement as described. It may hang idle in my shop for a couple of years - but it will be there when I need it.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 10/11/2018
by dano
Cycling Enthusiast
Portland Ore
Value Rating
Overall Rating
I needed it to do the job...it did just that...no hassle
makes it easy to replace the bottom bracket yourself
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 8/25/2013
by John L
Competitive Racer
Portland, OR
Value Rating
Overall Rating
Another great tool from Park
I used it to install a new set of GXP bearing cups. Simple to use and works perfectly,
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 2/5/2013
by Anonymous
Cycling Enthusiast
New Jersey
Value Rating
Overall Rating
Works as well as I hoped it would
The tool fit perfectly to the bottom bracket.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 12/3/2012
by Anonymous
Cycling Enthusiast
Philadelphia
Value Rating
Overall Rating
0 of 1 customers found this review helpful.
Does the Trick.
Thanks to the industry for making Campy and Shimano standard. Less tools to loose.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 7/9/2012
by Nick
Cycling Enthusiast
Phoenix, AZ
Value Rating
Overall Rating
0 of 4 customers found this review helpful.
Quality Tools
I do all my own bike maintenance on our 4 bikes, 2 road bikes and 2 mountain bikes.
Having the right tool for the job is critical to completing the job without frustration or damaging the bike or yourself. Although I've not yet got around to using this tool all the tools I have purchased from Park are great tools and I would highly recommend Park Tools.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 8/22/2010
by Anonymous
Cycling Enthusiast
Calagry, alberta
Value Rating
Overall Rating
2 of 2 customers found this review helpful.
Does what it is meant to do!
Works! Fits well and easy to use
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 2/18/2019
by Frankenbiker
Cycling Enthusiast
Arlington Virginia
1 of 2 customers found this review helpful.
Useful tool for someone like me
Park Tool has been making quality tools for a long time. I need this bottom bracket tool in my collection because I'm changing my cranksets several times a year. I have a front double, single and triple I switch in and out for mountain biking, cyclocrossgravel and road style riding. If you like to work on your own bike instead of taking it to your LBS, then this bottom bracket tool pays for itself in probably one use. You can count on the quality of Park Tools.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 1/3/2015
by Scott
Cycling Enthusiast
Laconia, NH
Worth the money
I picked this up when my mountain bike bottom bracket seized. I figured removing the old bottom bracket wasn't a big deal with vice grips but probably not a great idea for installing the new one. The right tool is always helpful when doing a job and this isn't any exception.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Reviewed 7/31/2018
by iammikeDOTorg
Competitive Racer
Portland, OR
Must-have tool
Pulling BBs? Swapping disc rotors (some of them)? This is the tool for you. As with everything they make, Park has done a great job making the best tool for the job. If you don't own this, you probably should.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Handy tool
BB Tool works great. Fits nice and secure.
Was this review useful to you?
Yes/
NoThank you for your feedback.
Mechanic's Corner
Articles will open in new tab.
Q & A with home mechanic Tommy Tuite.
