ProGold ProLink Chain Lubricant

I've used ProLink for many years on my road bike, having tried almost every lube on the market, and I keep coming back to it. It lubes like it was wet, and stays clean like it was dry. It goes on light, dries fast, leaves absolutely zero residue, and runs very clean. My chain is not just quiet it is totally silent. The lube's easy to renew, and cleans the chain when you do. It is not one of those light lubes that wears out during a century ride, and it's so easy to apply lightly and cleanly that re-lubing is about as easy as filling a water bottle or pumping a tire.

I don't know how this would work if you like to lube, say, monthly, or if you ride in mud. For you coastal types, YMMV, as I live in Utah and don't ride my road bike much in the rain or snow I use Phil's on my commuter, so don't need this for a wet weather lube. Utah is dusty and dirty, and this stuff runs cleaner than any lube I've used without ever wearing thin or squeaking.

BTW, I also put a drop or two on pivots, pedals, cable housings, and other moving metal. Summary it's light and clean but never wimpy, and it really works.

This is not DuMonde or Tri-Flo. ProLink is a strong solvent in addition to being a great lube. The trouble many run into is applying too much. Best time to apply is after a ride and at least 12 hours before the next one. To get the gunk off with the first application, spin the chain quickly and apply in a thin stream ONCE around Don't over do it. Let it sit for a few minutes and then go back and wipe off the crud and the excess ProLink, and wipe it off link by link. Take the time to work the chain around and wipe off every link. The next step is crucial Let it all dry. Overnight is best, but as much time as possible helps. After the first application, five or six drops will keep things humming. Be sure to wipe the chain clean of any excess every time.

This thing is horrible. My chain turns black after a couple of rides under 100mi.