Easton Aeroforce CNT Carbon Clip-On Aerobars

The Easton Aeroforce CNT™ Carbon Clip-on aerobar is super light, stiff, and packed with features. CNT™ construction blends carbon fiber with Carbon Nanotubes which Easton calls the lightest and strongest structures in existence. Taperwall™ construction uses very gradual and smooth butting for greater thickness at points of greatest stress without adding excessive weight. Cantilevered arms place the pad support behind the base bar for even for even weight distribution and vibration dampening. Supports are also part of the extension so there is no weak point of a bond. The supports also allow pad width adjustment with the turn of two allen keys without needing to remove the pads. Clamps are aluminum. Internal cable routing. 31.8mm clamp. 410 grams/pair.

The three fixed lengths reduce unnecessary material but require some arm measurement. Below sizing is based on a measurement from the elbow to the end of the furthest knuckle with a clenched fist.

• 31 to 34cm: Small
• 34 to 36cm: Small or Medium
• 36 to 39cm: Medium
• 39 to 41cm: Medium or Large
• 41+ cm: Large